Specifications
21
en
Engine Specifications
Model 120000
Displacement 12.48 ci (206 cc)
Bore 2.677 in (68 mm)
Stroke 2.205 in (56 mm)
Oil Capacity 18 -- 20 oz (0.54 -- 0.59 L)
Engine Specifications
Model 150000
Displacement 15.22 ci (249 cc)
Bore 2.970 in (75.44 mm)
Stroke 2.205 in (56 mm)
Oil Capacity 18 -- 20 oz (0.54 -- 0.59 L)
Engine Specifications
Model 200000
Displacement 18.64 ci (305 cc)
Bore 3.120 in (79.23 mm)
Stroke 2.438 in (61.67 mm)
Oil Capacity 26 -- 28 oz (0.77 -- 0.83 L)
Engine Specifications
Model 210000
Displacement 20.85 ci (342 cc)
Bore 3.300 in (83.82 mm)
Stroke 2.438 in (61.67 mm)
Oil Capacity 26 -- 28 oz (0.77 -- 0.83 L)
Tune-up Specifications *
Model 120000, 150000
Spark Plug Gap 0.030 in (0.76 mm)
Spark Plug Torque 180 lb-in (20 Nm)
Armature Air Gap 0.010 - 0.014 in
(0.25 - 0.36 mm)
Intake Valve Clearance 0.004 - 0.006 in
(0.10 - 0.15 mm)
Exhaust Valve Clearance 0.009 - 0.011 in
(0.23 - 0.28 mm)
Tune-up Specifications *
Model 200000, 210000
Spark Plug Gap 0.030 in (0.76 mm)
Spark Plug Torque 180 lb-in (20 Nm)
Armature Air Gap 0.010 - 0.014 in
(0.25 - 0.36 mm)
Intake Valve Clearance 0.004 - 0.006 in
(0.10 - 0.15 mm)
Exhaust Valve Clearance 0.009 - 0.011 in
(0.23 - 0.28 mm)
* Engine power will decrease 3.5% for each 1,000 feet (300 meters) above sea level and 1% for each 10° F(5.6° C) above 77° F(25° C). The engine will
operate satisfactorily at an angle up to 15°. Refer to the equipment operator’s manual for safe allowable operating limits on slopes.
Common Service Parts n
Service Part Part Number
Fuel Additive 5041, 5058
Resistor Spark Plug 491055
Long Life Platinum Spark Plug 5066
Service Part Part Number
Spark Plug Wrench 89838, 5023
Spark Tester 19368
n We recommend that you see any Briggs & Stratton Authorized Dealer for all maintenance and service of the engine and engine parts. Use only genu-
ine Briggs & Stratton parts.
Engine Power Rating Information
The gross power rating for individual gas engine models is labeled in ac-
cordance with SAE (Society of Automotive Engineers) code J1940 (Small
Engine Power & Torque Rating Procedure), and rating performance has
been obtained and corrected in accordance with SAE J1995 (Revision
2002-05). Torque values are derived at 3060 RPM; horsepower values are
derived at 3600 RPM. Actual gross engine power will be lower and is af-
fected by, among other things, ambient operating conditions and engine-to-
engine variability. Given both the wide array of products on which engines
are placed and the variety of environmental issues applicable to operating
the equipment, the gas engine will not develop the rated gross power when
used in a given piece of power equipment (actual “on-site” or net power).
This difference is due to a variety of factors including, but not limited to,
accessories (air cleaner, exhaust, charging, cooling, carburetor, fuel pump,
etc.), application limitations, ambient operating conditions (temperature,
humidity, altitude), and engine-to-engine variability. Due to manufacturing
and capacity limitations, Briggs & Stratton may substitute an engine of
higher rated power for this Series engine.
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals