Briggs-stratton 01936 User Manual download pdf (Page 5)

Pressure Washer

ASSEMBLY

IMPORTANT: Read entire owner’s manual before you

attempt to assemble or operate your new pressure washer.

Remove Pressure Washer From

Carton

1. Remove the parts bag, accessories, and inserts included

with pressure washer.

2. Slice two corners at the end of carton from top to

bottom so the panel can be folded down flat.

3. Remove pressure washer from carton.

PREPARING PRESSURE

WASHER FOR USE

If you have any problems with the assembly of your

pressure washer or if parts are missing or damaged, call the

pressure washer helpline at 1-800-743-4115. If calling for

assistance, please have the model, revision, and serial

number from the data tag available.

Perform these tasks to prepare unit for operation:

• Attach the handle to the main unit.

• Add oil to the engine.

• Add fuel to the fuel tank.

• Connect the high pressure hose to the spray gun and the

pump.

• Connect the water supply to the pump.

• Connect nozzle extension to spray gun.

• Select and install desired nozzle (if applicable).

Attach Handle to Unit

This manual describes assembly and use of three models

(01805, 01806 and 01936). Please see the appropriate

section for the handle instruction specific to your model.

To attach handle with accessory tray (Models 01805

and 01806):

NOTE: All assembly operations given in this section will

be described from the perspective of assembling the

pressure washer from the rear.

1. Slide plastic accessory tray onto handle and align holes

in accessory tray with holes on handle (Figure 1).

2. Secure tray to handle with self tapping screws using a

#2 phillips screwdriver. Ensure screws are tight but not

crushing the plastic accessory tray.

3. Place handle assembly onto handle supports connected

to main unit. Make sure holes in handle align with

holes on handle supports (Figure 2).

NOTE: It may be necessary to move handle supports

from side to side in order to align handle so it will slide

over handle supports.

Align Holes

Handle

Supports

Figure 2 — Attach Handle to Base

Figure 1 — Attach Accessory Tray

1 2 3 4 5 6 7 8 9 10 ... 34 35

Comments to this Manuals

No comments

Briggs-stratton 01936 User Manual Page 5

Comments to this Manuals

Related products and manuals for Carwash Briggs-stratton 01936